dmesg - 8192 MB DDR4-1500MT
random: get_random_bytes called from start_kernel+0x42/0x4e6 with crng_init=0
Linux version 4.13.9-300.fc27.x86_64 ([email protected]) (gcc version 7.2.1 20170915 (Red Hat 7.2.1-2) (GCC)) #1 SMP Mon Oct 23 13:41:58 UTC 2017
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000003ffffff] usable
BIOS-e820: [mem 0x0000000004000000-0x0000000004009fff] ACPI NVS
BIOS-e820: [mem 0x000000000400a000-0x0000000009bfffff] usable
BIOS-e820: [mem 0x0000000009c00000-0x0000000009ffffff] reserved
BIOS-e820: [mem 0x000000000a000000-0x000000000affffff] usable
BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
BIOS-e820: [mem 0x000000000b020000-0x00000000d393cfff] usable
BIOS-e820: [mem 0x00000000d393d000-0x00000000d3957fff] ACPI data
BIOS-e820: [mem 0x00000000d3958000-0x00000000da825fff] usable
BIOS-e820: [mem 0x00000000da826000-0x00000000da965fff] reserved
BIOS-e820: [mem 0x00000000da966000-0x00000000da96ffff] ACPI data
BIOS-e820: [mem 0x00000000da970000-0x00000000daa77fff] usable
BIOS-e820: [mem 0x00000000daa78000-0x00000000dae33fff] ACPI NVS
BIOS-e820: [mem 0x00000000dae34000-0x00000000db93bfff] reserved
BIOS-e820: [mem 0x00000000db93c000-0x00000000ddffffff] usable
BIOS-e820: [mem 0x00000000de000000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000041f37ffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x9e8de018-0x9e8ec057] usable ==> usable
e820: update [mem 0x9e8de018-0x9e8ec057] usable ==> usable
e820: update [mem 0x9e8c1018-0x9e8ddc57] usable ==> usable
e820: update [mem 0x9e8c1018-0x9e8ddc57] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x0000000003ffffff] usable
reserve setup_data: [mem 0x0000000004000000-0x0000000004009fff] ACPI NVS
reserve setup_data: [mem 0x000000000400a000-0x0000000009bfffff] usable
reserve setup_data: [mem 0x0000000009c00000-0x0000000009ffffff] reserved
reserve setup_data: [mem 0x000000000a000000-0x000000000affffff] usable
reserve setup_data: [mem 0x000000000b000000-0x000000000b01ffff] reserved
reserve setup_data: [mem 0x000000000b020000-0x000000009e8c1017] usable
reserve setup_data: [mem 0x000000009e8c1018-0x000000009e8ddc57] usable
reserve setup_data: [mem 0x000000009e8ddc58-0x000000009e8de017] usable
reserve setup_data: [mem 0x000000009e8de018-0x000000009e8ec057] usable
reserve setup_data: [mem 0x000000009e8ec058-0x00000000d393cfff] usable
reserve setup_data: [mem 0x00000000d393d000-0x00000000d3957fff] ACPI data
reserve setup_data: [mem 0x00000000d3958000-0x00000000da825fff] usable
reserve setup_data: [mem 0x00000000da826000-0x00000000da965fff] reserved
reserve setup_data: [mem 0x00000000da966000-0x00000000da96ffff] ACPI data
reserve setup_data: [mem 0x00000000da970000-0x00000000daa77fff] usable
reserve setup_data: [mem 0x00000000daa78000-0x00000000dae33fff] ACPI NVS
reserve setup_data: [mem 0x00000000dae34000-0x00000000db93bfff] reserved
reserve setup_data: [mem 0x00000000db93c000-0x00000000ddffffff] usable
reserve setup_data: [mem 0x00000000de000000-0x00000000dfffffff] reserved
reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
reserve setup_data: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
reserve setup_data: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
reserve setup_data: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
reserve setup_data: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
reserve setup_data: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
reserve setup_data: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
reserve setup_data: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000feefffff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000041f37ffff] usable
efi: EFI v2.60 by American Megatrends
efi: ACPI 2.0=0xd393d000 ACPI=0xd393d000 SMBIOS=0xdb809000 SMBIOS 3.0=0xdb808000 ESRT=0xd81e2b98 MEMATTR=0xd8239018
random: fast init done
SMBIOS 3.1.1 present.
DMI: System manufacturer System Product Name/TUF B350M-PLUS GAMING, BIOS 3803 01/22/2018
tsc: Fast TSC calibration using PIT
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x41f380 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFE0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000420000000 aka 16896M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xde000 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x00000000d81e2b98 to 0x00000000d81e2bd0.
Base memory trampoline at [ffff9f9900096000] 96000 size 24576
Using GB pages for direct mapping
BRK [0x5c495000, 0x5c495fff] PGTABLE
BRK [0x5c496000, 0x5c496fff] PGTABLE
BRK [0x5c497000, 0x5c497fff] PGTABLE
BRK [0x5c498000, 0x5c498fff] PGTABLE
BRK [0x5c499000, 0x5c499fff] PGTABLE
BRK [0x5c49a000, 0x5c49afff] PGTABLE
BRK [0x5c49b000, 0x5c49bfff] PGTABLE
BRK [0x5c49c000, 0x5c49cfff] PGTABLE
BRK [0x5c49d000, 0x5c49dfff] PGTABLE
BRK [0x5c49e000, 0x5c49efff] PGTABLE
Secure boot disabled
RAMDISK: [mem 0x3d040000-0x3e814fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000D393D000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000D393D098 0000AC (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000D39478D8 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20170531/tbfadt-658)
ACPI: DSDT 0x00000000D393D1E0 00A6F8 (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x00000000DAE1CE00 000040
ACPI: APIC 0x00000000D39479F0 0000DE (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000D3947AD0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x00000000D3947B18 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000D3955E28 001993 (v01 AMD AmdTable 00000001 INTL 20120913)
ACPI: SSDT 0x00000000D3947C10 008C98 (v02 AMD AMD ALIB 00000002 MSFT 04000000)
ACPI: SSDT 0x00000000D39508A8 001A58 (v01 AMD AMD CPU 00000001 AMD 00000001)
ACPI: CRAT 0x00000000D3952300 000BD0 (v01 AMD AMD CRAT 00000001 AMD 00000001)
ACPI: CDIT 0x00000000D3952ED0 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001)
ACPI: SSDT 0x00000000D3952F00 002C39 (v01 AMD AMD AOD 00000001 INTL 20120913)
ACPI: MCFG 0x00000000D3955B40 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 0x00000000D3955B80 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: SSDT 0x00000000D3955BB8 000024 (v01 AMDFCH FCHZP 00001000 INTL 20120913)
ACPI: UEFI 0x00000000D3955BE0 000042 (v01 00000000 00000000)
ACPI: BGRT 0x00000000D3955C28 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: IVRS 0x00000000D3955C60 0000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000)
ACPI: SSDT 0x00000000D3955D30 0000F8 (v01 AMD AMD PT 00001000 INTL 20120913)
ACPI: Local APIC address 0xfee00000
system APIC only can use physical flat
Setting APIC routing to physical flat.
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000041f37ffff]
NODE_DATA(0) allocated [mem 0x41f355000-0x41f37ffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000041f37ffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x0000000003ffffff]
node 0: [mem 0x000000000400a000-0x0000000009bfffff]
node 0: [mem 0x000000000a000000-0x000000000affffff]
node 0: [mem 0x000000000b020000-0x00000000d393cfff]
node 0: [mem 0x00000000d3958000-0x00000000da825fff]
node 0: [mem 0x00000000da970000-0x00000000daa77fff]
node 0: [mem 0x00000000db93c000-0x00000000ddffffff]
node 0: [mem 0x0000000100000000-0x000000041f37ffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000041f37ffff]
On node 0 totalpages: 4177612
DMA zone: 64 pages used for memmap
DMA zone: 26 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 14063 pages used for memmap
DMA32 zone: 900013 pages, LIFO batch:31
Normal zone: 51150 pages used for memmap
Normal zone: 3273600 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
system APIC only can use physical flat
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 13, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 14, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
smpboot: Allowing 16 CPUs, 4 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x04000000-0x04009fff]
PM: Registered nosave memory: [mem 0x09c00000-0x09ffffff]
PM: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
PM: Registered nosave memory: [mem 0x9e8c1000-0x9e8c1fff]
PM: Registered nosave memory: [mem 0x9e8dd000-0x9e8ddfff]
PM: Registered nosave memory: [mem 0x9e8de000-0x9e8defff]
PM: Registered nosave memory: [mem 0x9e8ec000-0x9e8ecfff]
PM: Registered nosave memory: [mem 0xd393d000-0xd3957fff]
PM: Registered nosave memory: [mem 0xda826000-0xda965fff]
PM: Registered nosave memory: [mem 0xda966000-0xda96ffff]
PM: Registered nosave memory: [mem 0xdaa78000-0xdae33fff]
PM: Registered nosave memory: [mem 0xdae34000-0xdb93bfff]
PM: Registered nosave memory: [mem 0xde000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfe9fffff]
PM: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
PM: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
PM: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
PM: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
PM: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
PM: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
PM: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
PM: Registered nosave memory: [mem 0xfedd6000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
percpu: Embedded 37 pages/cpu @ffff9f9d1ec00000 s112600 r8192 d30760 u262144
pcpu-alloc: s112600 r8192 d30760 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4112309
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Memory: 16208140K/16710448K available (8836K kernel code, 2404K rwdata, 3760K rodata, 2224K init, 1976K bss, 502308K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
ftrace: allocating 34945 entries in 137 pages
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
NR_IRQS: 524544, nr_irqs: 1096, preallocated irqs: 16
Offload RCU callbacks from CPUs: .
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 4242.058 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 8484.11 BogoMIPS (lpj=4242058)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170531
ACPI: 7 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 23 MCE banks
LVT offset 1 assigned for vector 0xf9
LVT offset 2 assigned for vector 0xf4
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
Freeing SMP alternatives memory: 32K
smpboot: Max logical packages: 3
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Ryzen 5 1600 Six-Core Processor (family: 0x17, model: 0x1, stepping: 0x1)
Performance Events: Fam17h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
Hierarchical SRCU implementation.
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11
smp: Brought up 1 node, 12 CPUs
smpboot: Total of 12 processors activated (101631.25 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x04000000-0x04009fff] (40960 bytes)
PM: Registering ACPI NVS region [mem 0xdaa78000-0xdae33fff] (3915776 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 4096 (order: 6, 262144 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 17:56:13, date: 03/07/18
NET: Registered protocol family 16
cpuidle: using governor menu
PCCT header not found.
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 2 blocks of module-level executable AML code
ACPI Error: Needed [Integer/String/Buffer], found [Region] ffff9f9d1e9720d8 (20170531/exresop-424)
ACPI Exception: AE_AML_OPERAND_TYPE, Could not execute arguments for [IOB2] (Region) (20170531/nsinit-412)
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1450] type 00 class 0x060000
pci 0000:00:00.2: [1022:1451] type 00 class 0x080600
pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
pci 0000:00:01.1: [1022:1453] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.3: [1022:1453] type 01 class 0x060400
pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [1022:1452] type 00 class 0x060000
pci 0000:00:03.0: [1022:1452] type 00 class 0x060000
pci 0000:00:03.1: [1022:1453] type 01 class 0x060400
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [1022:1452] type 00 class 0x060000
pci 0000:00:07.0: [1022:1452] type 00 class 0x060000
pci 0000:00:07.1: [1022:1454] type 01 class 0x060400
pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
pci 0000:00:08.1: [1022:1454] type 01 class 0x060400
pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
pci 0000:00:18.0: [1022:1460] type 00 class 0x060000
pci 0000:00:18.1: [1022:1461] type 00 class 0x060000
pci 0000:00:18.2: [1022:1462] type 00 class 0x060000
pci 0000:00:18.3: [1022:1463] type 00 class 0x060000
pci 0000:00:18.4: [1022:1464] type 00 class 0x060000
pci 0000:00:18.5: [1022:1465] type 00 class 0x060000
pci 0000:00:18.6: [1022:1466] type 00 class 0x060000
pci 0000:00:18.7: [1022:1467] type 00 class 0x060000
pci 0000:01:00.0: [126f:2263] type 00 class 0x010802
pci 0000:01:00.0: reg 0x10: [mem 0xfe900000-0xfe903fff 64bit]
pci 0000:00:01.1: PCI bridge to [bus 01]
pci 0000:00:01.1: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:02:00.0: [1022:43bb] type 00 class 0x0c0330
pci 0000:02:00.0: reg 0x10: [mem 0xfe6a0000-0xfe6a7fff 64bit]
pci 0000:02:00.0: PME# supported from D3hot D3cold
pci 0000:02:00.1: [1022:43b7] type 00 class 0x010601
pci 0000:02:00.1: reg 0x24: [mem 0xfe680000-0xfe69ffff]
pci 0000:02:00.1: reg 0x30: [mem 0xfe600000-0xfe67ffff pref]
pci 0000:02:00.1: PME# supported from D3hot D3cold
pci 0000:02:00.2: [1022:43b2] type 01 class 0x060400
pci 0000:02:00.2: PME# supported from D3hot D3cold
pci 0000:00:01.3: PCI bridge to [bus 02-06]
pci 0000:00:01.3: bridge window [io 0xf000-0xffff]
pci 0000:00:01.3: bridge window [mem 0xfe500000-0xfe6fffff]
pci 0000:03:00.0: [1022:43b4] type 01 class 0x060400
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:01.0: [1022:43b4] type 01 class 0x060400
pci 0000:03:01.0: PME# supported from D3hot D3cold
pci 0000:03:04.0: [1022:43b4] type 01 class 0x060400
pci 0000:03:04.0: PME# supported from D3hot D3cold
pci 0000:02:00.2: PCI bridge to [bus 03-06]
pci 0000:02:00.2: bridge window [io 0xf000-0xffff]
pci 0000:02:00.2: bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [io 0xf000-0xf0ff]
pci 0000:04:00.0: reg 0x18: [mem 0xfe504000-0xfe504fff 64bit]
pci 0000:04:00.0: reg 0x20: [mem 0xfe500000-0xfe503fff 64bit]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: PCI bridge to [bus 04]
pci 0000:03:00.0: bridge window [io 0xf000-0xffff]
pci 0000:03:00.0: bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:03:01.0: PCI bridge to [bus 05]
pci 0000:03:04.0: PCI bridge to [bus 06]
pci 0000:07:00.0: [1002:67ff] type 00 class 0x030000
pci 0000:07:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:07:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:07:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:07:00.0: reg 0x24: [mem 0xfe800000-0xfe83ffff]
pci 0000:07:00.0: reg 0x30: [mem 0xfe840000-0xfe85ffff pref]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:07:00.1: [1002:aae0] type 00 class 0x040300
pci 0000:07:00.1: reg 0x10: [mem 0xfe860000-0xfe863fff 64bit]
pci 0000:07:00.1: supports D1 D2
pci 0000:00:03.1: PCI bridge to [bus 07]
pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
pci 0000:00:03.1: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:08:00.0: [1022:145a] type 00 class 0x130000
pci 0000:08:00.2: [1022:1456] type 00 class 0x108000
pci 0000:08:00.2: reg 0x18: [mem 0xfe300000-0xfe3fffff]
pci 0000:08:00.2: reg 0x24: [mem 0xfe400000-0xfe401fff]
pci 0000:08:00.3: [1022:145c] type 00 class 0x0c0330
pci 0000:08:00.3: reg 0x10: [mem 0xfe200000-0xfe2fffff 64bit]
pci 0000:08:00.3: PME# supported from D0 D3hot D3cold
pci 0000:00:07.1: PCI bridge to [bus 08]
pci 0000:00:07.1: bridge window [mem 0xfe200000-0xfe4fffff]
pci 0000:09:00.0: [1022:1455] type 00 class 0x130000
pci 0000:09:00.2: [1022:7901] type 00 class 0x010601
pci 0000:09:00.2: reg 0x24: [mem 0xfe708000-0xfe708fff]
pci 0000:09:00.2: PME# supported from D3hot D3cold
pci 0000:09:00.3: [1022:1457] type 00 class 0x040300
pci 0000:09:00.3: reg 0x10: [mem 0xfe700000-0xfe707fff]
pci 0000:09:00.3: PME# supported from D0 D3hot D3cold
pci 0000:00:08.1: PCI bridge to [bus 09]
pci 0000:00:08.1: bridge window [mem 0xfe700000-0xfe7fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
pci 0000:07:00.0: vgaarb: setting as boot VGA device
pci 0000:07:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:07:00.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x09c00000-0x0bffffff]
e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
e820: reserve RAM buffer [mem 0x9e8c1018-0x9fffffff]
e820: reserve RAM buffer [mem 0x9e8de018-0x9fffffff]
e820: reserve RAM buffer [mem 0xd393d000-0xd3ffffff]
e820: reserve RAM buffer [mem 0xda826000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdaa78000-0xdbffffff]
e820: reserve RAM buffer [mem 0xde000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x41f380000-0x41fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0xfeb80000-0xfebfffff] could not be reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x0300-0x030f] has been reserved
system 00:03: [io 0x0230-0x023f] has been reserved
system 00:03: [io 0x0290-0x029f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: [io 0x040b] has been reserved
system 00:05: [io 0x04d6] has been reserved
system 00:05: [io 0x0c00-0x0c01] has been reserved
system 00:05: [io 0x0c14] has been reserved
system 00:05: [io 0x0c50-0x0c51] has been reserved
system 00:05: [io 0x0c52] has been reserved
system 00:05: [io 0x0c6c] has been reserved
system 00:05: [io 0x0c6f] has been reserved
system 00:05: [io 0x0cd0-0x0cd1] has been reserved
system 00:05: [io 0x0cd2-0x0cd3] has been reserved
system 00:05: [io 0x0cd4-0x0cd5] has been reserved
system 00:05: [io 0x0cd6-0x0cd7] has been reserved
system 00:05: [io 0x0cd8-0x0cdf] has been reserved
system 00:05: [io 0x0800-0x089f] has been reserved
system 00:05: [io 0x0b00-0x0b0f] has been reserved
system 00:05: [io 0x0b20-0x0b3f] has been reserved
system 00:05: [io 0x0900-0x090f] has been reserved
system 00:05: [io 0x0910-0x091f] has been reserved
system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:05: [mem 0xfec01000-0xfec01fff] could not be reserved
system 00:05: [mem 0xfedc0000-0xfedc0fff] has been reserved
system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:05: [mem 0xfed80000-0xfed8ffff] could not be reserved
system 00:05: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 6 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.1: PCI bridge to [bus 01]
pci 0000:00:01.1: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:03:00.0: PCI bridge to [bus 04]
pci 0000:03:00.0: bridge window [io 0xf000-0xffff]
pci 0000:03:00.0: bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:03:01.0: PCI bridge to [bus 05]
pci 0000:03:04.0: PCI bridge to [bus 06]
pci 0000:02:00.2: PCI bridge to [bus 03-06]
pci 0000:02:00.2: bridge window [io 0xf000-0xffff]
pci 0000:02:00.2: bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:00:01.3: PCI bridge to [bus 02-06]
pci 0000:00:01.3: bridge window [io 0xf000-0xffff]
pci 0000:00:01.3: bridge window [mem 0xfe500000-0xfe6fffff]
pci 0000:00:03.1: PCI bridge to [bus 07]
pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
pci 0000:00:03.1: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:00:07.1: PCI bridge to [bus 08]
pci 0000:00:07.1: bridge window [mem 0xfe200000-0xfe4fffff]
pci 0000:00:08.1: PCI bridge to [bus 09]
pci 0000:00:08.1: bridge window [mem 0xfe700000-0xfe7fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:02: resource 0 [io 0xf000-0xffff]
pci_bus 0000:02: resource 1 [mem 0xfe500000-0xfe6fffff]
pci_bus 0000:03: resource 0 [io 0xf000-0xffff]
pci_bus 0000:03: resource 1 [mem 0xfe500000-0xfe5fffff]
pci_bus 0000:04: resource 0 [io 0xf000-0xffff]
pci_bus 0000:04: resource 1 [mem 0xfe500000-0xfe5fffff]
pci_bus 0000:07: resource 0 [io 0xe000-0xefff]
pci_bus 0000:07: resource 1 [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:07: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
pci_bus 0000:08: resource 1 [mem 0xfe200000-0xfe4fffff]
pci_bus 0000:09: resource 1 [mem 0xfe700000-0xfe7fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:07:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 24404K
AMD-Vi: IOMMU performance counters supported
iommu: Adding device 0000:00:01.0 to group 0, default domain type 3
iommu: Adding device 0000:00:01.1 to group 1, default domain type 3
iommu: Adding device 0000:00:01.3 to group 2, default domain type 3
iommu: Adding device 0000:00:02.0 to group 3, default domain type 3
iommu: Adding device 0000:00:03.0 to group 4, default domain type 3
iommu: Adding device 0000:00:03.1 to group 5, default domain type 3
iommu: Adding device 0000:00:04.0 to group 6, default domain type 3
iommu: Adding device 0000:00:07.0 to group 7, default domain type 3
iommu: Adding device 0000:00:07.1 to group 8, default domain type 3
iommu: Adding device 0000:00:08.0 to group 9, default domain type 3
iommu: Adding device 0000:00:08.1 to group 10, default domain type 3
iommu: Adding device 0000:00:14.0 to group 11, default domain type 3
iommu: Adding device 0000:00:14.3 to group 11, default domain type 3
iommu: Adding device 0000:00:18.0 to group 12, default domain type 3
iommu: Adding device 0000:00:18.1 to group 12, default domain type 3
iommu: Adding device 0000:00:18.2 to group 12, default domain type 3
iommu: Adding device 0000:00:18.3 to group 12, default domain type 3
iommu: Adding device 0000:00:18.4 to group 12, default domain type 3
iommu: Adding device 0000:00:18.5 to group 12, default domain type 3
iommu: Adding device 0000:00:18.6 to group 12, default domain type 3
iommu: Adding device 0000:00:18.7 to group 12, default domain type 3
iommu: Adding device 0000:01:00.0 to group 13, default domain type 3
iommu: Adding device 0000:02:00.0 to group 14, default domain type 3
iommu: Adding device 0000:02:00.1 to group 14, default domain type 3
iommu: Adding device 0000:02:00.2 to group 14, default domain type 3
iommu: Adding device 0000:03:00.0 to group 14, default domain type 3
iommu: Adding device 0000:03:01.0 to group 14, default domain type 3
iommu: Adding device 0000:03:04.0 to group 14, default domain type 3
iommu: Adding device 0000:04:00.0 to group 14, default domain type 3
iommu: Adding device 0000:07:00.0 to group 15, default domain type 3
iommu: Using direct mapping for device 0000:07:00.0
iommu: Adding device 0000:07:00.1 to group 15, default domain type 4
iommu: Adding device 0000:08:00.0 to group 16, default domain type 3
iommu: Adding device 0000:08:00.2 to group 17, default domain type 3
iommu: Adding device 0000:08:00.3 to group 18, default domain type 3
iommu: Adding device 0000:09:00.0 to group 19, default domain type 3
iommu: Adding device 0000:09:00.2 to group 20, default domain type 3
iommu: Adding device 0000:09:00.3 to group 21, default domain type 3
AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
AMD-Vi: Extended features (0xf77ef22294ada):
PPR NX GT IA GA PC GA_vAPIC
AMD-Vi: Interrupt remapping enabled
AMD-Vi: virtual APIC enabled
AMD-Vi: Lazy IO/TLB flushing enabled
amd_uncore: AMD NB counters detected
amd_uncore: AMD LLC counters detected
perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1520445373.030:1): state=initialized audit_enabled=0 res=1
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=22 bucket_order=0
zbud: loaded
SELinux: Registering netfilter hooks
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
atomic64_test: passed for x86-64 platform with CX8 and with SSE
pcieport 0000:00:01.1: AER enabled with IRQ 26
pcieport 0000:00:01.3: AER enabled with IRQ 27
pcieport 0000:00:03.1: AER enabled with IRQ 28
pcieport 0000:00:07.1: AER enabled with IRQ 29
pcieport 0000:00:08.1: AER enabled with IRQ 31
efifb: probing for efifb
efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
GHES: HEST is not enabled!
00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ahci 0000:02:00.1: version 3.0
ahci 0000:02:00.1: SSS flag set, parallel bus scan disabled
ahci 0000:02:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode
ahci 0000:02:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
ata1: SATA max UDMA/133 abar m131072@0xfe680000 port 0xfe680100 irq 39
ata2: SATA max UDMA/133 abar m131072@0xfe680000 port 0xfe680180 irq 39
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m131072@0xfe680000 port 0xfe680300 irq 39
ata6: SATA max UDMA/133 abar m131072@0xfe680000 port 0xfe680380 irq 39
ata7: DUMMY
ata8: DUMMY
ahci 0000:09:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:09:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
scsi host8: ahci
ata9: SATA max UDMA/133 abar m4096@0xfe708000 port 0xfe708100 irq 41
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
QUIRK: Enable AMD PLL fix
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:02:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x00000418
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.13.9-300.fc27.x86_64 xhci-hcd
usb usb1: SerialNumber: 0000:02:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:02:00.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.13.9-300.fc27.x86_64 xhci-hcd
usb usb2: SerialNumber: 0000:02:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
xhci_hcd 0000:08:00.3: xHCI Host Controller
xhci_hcd 0000:08:00.3: new USB bus registered, assigned bus number 3
xhci_hcd 0000:08:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x00000418
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.13.9-300.fc27.x86_64 xhci-hcd
usb usb3: SerialNumber: 0000:08:00.3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:08:00.3: xHCI Host Controller
xhci_hcd 0000:08:00.3: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.13.9-300.fc27.x86_64 xhci-hcd
usb usb4: SerialNumber: 0000:08:00.3
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: [email protected]
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
ip_tables: (C) 2000-2006 Netfilter Core Team
Initializing XFRM netlink socket
NET: Registered protocol family 10
Segment Routing with IPv6
mip6: Mobile IPv6
NET: Registered protocol family 17
RAS: Correctable Errors collector initialized.
microcode: CPU0: patch_level=0x08001129
microcode: CPU1: patch_level=0x08001129
microcode: CPU2: patch_level=0x08001129
microcode: CPU3: patch_level=0x08001129
microcode: CPU4: patch_level=0x08001129
microcode: CPU5: patch_level=0x08001129
microcode: CPU6: patch_level=0x08001129
microcode: CPU7: patch_level=0x08001129
microcode: CPU8: patch_level=0x08001129
microcode: CPU9: patch_level=0x08001129
microcode: CPU10: patch_level=0x08001129
microcode: CPU11: patch_level=0x08001129
microcode: Microcode Update Driver: v2.2.
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
sched_clock: Marking stable (1436095495, 0)->(1635751198, -199655703)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Fedora kernel signing key: 7bf71b7aa6845adff2b1cf1f1968839d5134fb7e'
Loaded UEFI:db cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2' linked to secondary sys keyring
Loaded UEFI:db cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071' linked to secondary sys keyring
Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring
Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring
Loaded UEFI:db cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to secondary sys keyring
Loaded UEFI:MokListRT cert 'Fedora Secure Boot CA: fde32599c2d61db1bf5807335d7b20e4cd963b42' linked to secondary sys keyring
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type encrypted registered
Magic number: 10:201:946
cpuid cpu1: hash matches
tty tty3: hash matches
processor cpu1: hash matches
rtc_cmos 00:02: setting system clock to 2018-03-07 17:56:14 UTC (1520445374)
PM: Hibernation image not present or could not be loaded.
ata9: SATA link down (SStatus 0 SControl 300)
usb 3-3: new full-speed USB device number 2 using xhci_hcd
usb 1-5: new high-speed USB device number 2 using xhci_hcd
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-8: TOSHIBA HDWD120, MX4OACF0, max UDMA/133
ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA TOSHIBA HDWD120 ACF0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: Attached scsi generic sg0 type 0
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
usb 3-3: New USB device found, idVendor=258a, idProduct=1006
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: Gaming KB
usb 3-3: Manufacturer: Gaming KB
input: Gaming KB Gaming KB as /devices/pci0000:00/0000:00:07.1/0000:08:00.3/usb3/3-3/3-3:1.0/0003:258A:1006.0001/input/input2
hid-generic 0003:258A:1006.0001: input,hidraw0: USB HID v1.11 Keyboard [Gaming KB Gaming KB ] on usb-0000:08:00.3-3/input0
input: Gaming KB Gaming KB as /devices/pci0000:00/0000:00:07.1/0000:08:00.3/usb3/3-3/3-3:1.1/0003:258A:1006.0002/input/input3
usb 1-5: New USB device found, idVendor=148f, idProduct=5370
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5: Product: 802.11 n WLAN
usb 1-5: Manufacturer: Ralink
usb 1-5: SerialNumber: 1.0
hid-generic 0003:258A:1006.0002: input,hiddev96,hidraw1: USB HID v1.11 Keyboard [Gaming KB Gaming KB ] on usb-0000:08:00.3-3/input1
tsc: Refined TSC clocksource calibration: 4242.030 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3d2579aee3d, max_idle_ns: 440795353302 ns
usb 3-4: new low-speed USB device number 3 using xhci_hcd
usb 3-4: New USB device found, idVendor=1bcf, idProduct=0005
usb 3-4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 3-4: Product: USB Optical Mouse
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-8: Hitachi HDS721010CLA332, JP4OA3FE, max UDMA/100
ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/100
scsi 1:0:0:0: Direct-Access ATA Hitachi HDS72101 A3FE PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Attached SCSI disk
input: USB Optical Mouse as /devices/pci0000:00/0000:00:07.1/0000:08:00.3/usb3/3-4/3-4:1.0/0003:1BCF:0005.0003/input/input4
hid-generic 0003:1BCF:0005.0003: input,hidraw2: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:08:00.3-4/input0
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5.00: ATA-9: TOSHIBA THNSNJ256GCSU, JURA0101, max UDMA/100
ata5.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata5.00: configured for UDMA/100
scsi 4:0:0:0: Direct-Access ATA TOSHIBA THNSNJ25 0101 PQ: 0 ANSI: 5
sd 4:0:0:0: [sdc] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1 sdc2
sd 4:0:0:0: [sdc] Attached SCSI disk
ata6: SATA link down (SStatus 0 SControl 300)
Freeing unused kernel memory: 2224K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1392K
Freeing unused kernel memory: 336K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
rodata_test: all tests were successful
clocksource: Switched to clocksource tsc
systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
systemd[1]: Reached target Local File Systems.
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Reached target Timers.
systemd[1]: Reached target Swap.
audit: type=1130 audit(1520445376.183:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1520445376.185:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1520445376.264:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1520445376.292:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1520445376.327:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1520445376.330:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1520445376.330:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1520445376.339:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1520445376.463:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
nvme nvme0: pci function 0000:01:00.0
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.0 eth0: RTL8168h/8111h at 0xffffc3df81a29000, b0:6e:bf:bc:c6:fe, XID 14100800 IRQ 47
r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
r8169 0000:04:00.0 enp4s0: renamed from eth0
nvme nvme0: missing or invalid SUBNQN field.
nvme nvme0: allocated 64 MiB host memory buffer.
nvme nvme0: nvme_revalidate_ns: Identify Descriptors failed
nvme nvme0: nvme_revalidate_ns: Identify Descriptors failed
nvme0n1: p1
random: crng init done
EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[280]: Received SIGTERM from PID 1 (systemd).
systemd: 17 output lines suppressed due to ratelimiting
SELinux: 32768 avtab hash slots, 108635 rules.
SELinux: 32768 avtab hash slots, 108635 rules.
SELinux: 8 users, 14 roles, 5090 types, 318 bools, 1 sens, 1024 cats
SELinux: 97 classes, 108635 rules
SELinux: Permission getrlimit in class process not defined in policy.
SELinux: Class sctp_socket not defined in policy.
SELinux: Class icmp_socket not defined in policy.
SELinux: Class ax25_socket not defined in policy.
SELinux: Class ipx_socket not defined in policy.
SELinux: Class netrom_socket not defined in policy.
SELinux: Class atmpvc_socket not defined in policy.
SELinux: Class x25_socket not defined in policy.
SELinux: Class rose_socket not defined in policy.
SELinux: Class decnet_socket not defined in policy.
SELinux: Class atmsvc_socket not defined in policy.
SELinux: Class rds_socket not defined in policy.
SELinux: Class irda_socket not defined in policy.
SELinux: Class pppox_socket not defined in policy.
SELinux: Class llc_socket not defined in policy.
SELinux: Class can_socket not defined in policy.
SELinux: Class tipc_socket not defined in policy.
SELinux: Class bluetooth_socket not defined in policy.
SELinux: Class iucv_socket not defined in policy.
SELinux: Class rxrpc_socket not defined in policy.
SELinux: Class isdn_socket not defined in policy.
SELinux: Class phonet_socket not defined in policy.
SELinux: Class ieee802154_socket not defined in policy.
SELinux: Class caif_socket not defined in policy.
SELinux: Class alg_socket not defined in policy.
SELinux: Class nfc_socket not defined in policy.
SELinux: Class vsock_socket not defined in policy.
SELinux: Class kcm_socket not defined in policy.
SELinux: Class qipcrtr_socket not defined in policy.
SELinux: Class smc_socket not defined in policy.
SELinux: the above unknown classes and permissions will be allowed
SELinux: policy capability network_peer_controls=1
SELinux: policy capability open_perms=1
SELinux: policy capability extended_socket_class=0
SELinux: policy capability always_check_network=0
SELinux: policy capability cgroup_seclabel=1
SELinux: unknown policy capability 5
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
systemd[1]: Successfully loaded SELinux policy in 109.441ms.
systemd[1]: Relabelled /dev and /run in 50.705ms.
EXT4-fs (sdc2): re-mounted. Opts: (null)
acpi_cpufreq: overriding BIOS provided _PSD data
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
ccp 0000:08:00.2: enabling device (0000 -> 0002)
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x2e for SMBus port selection
ccp 0000:08:00.2: enabled
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Vendor ID: 0x1022, Device ID: 0x790b, Revision ID: 0x59
sp5100_tco: I/O address 0x0cd6 already in use
snd_hda_intel 0000:07:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:07:00.1: Force to non-snoop mode
snd_hda_intel 0000:09:00.3: enabling device (0000 -> 0002)
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:07:00.1/sound/card0/input5
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:07:00.1/sound/card0/input6
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:07:00.1/sound/card0/input7
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:07:00.1/sound/card0/input8
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:07:00.1/sound/card0/input9
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: dig-out=0x11/0x0
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:09:00.3/sound/card1/input10
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:09:00.3/sound/card1/input11
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:09:00.3/sound/card1/input12
input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:09:00.3/sound/card1/input13
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:09:00.3/sound/card1/input14
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
SVM: Virtual VMLOAD VMSAVE supported
MCE: In-kernel MCE decoding enabled.
[drm] amdgpu kernel modesetting enabled.
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
asus_wmi: ASUS WMI generic driver loaded
AMD IOMMUv2 driver by Joerg Roedel
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input15
asus_wmi: Number of fans: 1
Found CRAT image with size=3024
Parsing CRAT table with 1 nodes
Found CU entry in CRAT table with proximity_domain=0 caps=0
CU CPU: cores=12 id_base=0
Found memory entry in CRAT table with proximity_domain=0
Found memory entry in CRAT table with proximity_domain=0
Found memory entry in CRAT table with proximity_domain=0
Found cache entry in CRAT table with processor_id=0
Found cache entry in CRAT table with processor_id=0
Found cache entry in CRAT table with processor_id=0
Found cache entry in CRAT table with processor_id=0
Found cache entry in CRAT table with processor_id=2
Found cache entry in CRAT table with processor_id=2
Found cache entry in CRAT table with processor_id=2
Found cache entry in CRAT table with processor_id=4
Found cache entry in CRAT table with processor_id=4
Found cache entry in CRAT table with processor_id=4
Found cache entry in CRAT table with processor_id=8
Found cache entry in CRAT table with processor_id=8
Found cache entry in CRAT table with processor_id=8
Found cache entry in CRAT table with processor_id=8
Found cache entry in CRAT table with processor_id=10
Found cache entry in CRAT table with processor_id=10
Found cache entry in CRAT table with processor_id=10
Found cache entry in CRAT table with processor_id=12
Found cache entry in CRAT table with processor_id=12
Found cache entry in CRAT table with processor_id=12
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Creating topology SYSFS entries
Finished initializing topology ret=0
kfd kfd: Initialized module
checking generic (e0000000 300000) vs hw (e0000000 10000000)
fb: switching to amdgpudrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (POLARIS11 0x1002:0x67FF 0x1462:0x8A91 0xCF).
[drm] register mmio base: 0xFE800000
[drm] register mmio size: 262144
[drm] probing gen 2 caps for device 1022:1453 = 737903/e
[drm] probing mlw for device 1022:1453 = 737903
[drm] UVD is enabled in VM mode
[drm] VCE enabled in VM mode
[drm] BIOS signature incorrect 0 0
amdgpu 0000:07:00.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0xffff
ATOM BIOS: 113-C98121-H01
[drm] GPU post is not needed
[drm] vm size is 64 GB, block size is 13-bit
amdgpu 0000:07:00.0: VRAM: 4096M 0x0000000000000000 - 0x00000000FFFFFFFF (4096M used)
amdgpu 0000:07:00.0: GTT: 4096M 0x0000000100000000 - 0x00000001FFFFFFFF
[drm] Detected VRAM RAM=4096M, BAR=256M
[drm] RAM width 128bits GDDR5
[TTM] Zone kernel: Available graphics memory: 8213640 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 4096M of VRAM memory ready
[drm] amdgpu: 4096M of GTT memory ready.
[drm] GART: num cpu pages 1048576, num gpu pages 1048576
[drm] PCIE GART of 4096M enabled (table at 0x0000000000040000).
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
amdgpu 0000:07:00.0: amdgpu: using MSI.
[drm] amdgpu: irq initialized.
usb 1-5: reset high-speed USB device number 2 using xhci_hcd
Adding 16777212k swap on /dev/mapper/lvmvg-lvswap. Priority:-1 extents:1 across:16777212k FS
amdgpu: [powerplay] amdgpu: powerplay sw initialized
[drm] AMDGPU Display Connectors
[drm] Connector 0:
[drm] DP-1
[drm] HPD2
[drm] DDC: 0x4868 0x4868 0x4869 0x4869 0x486a 0x486a 0x486b 0x486b
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY1
[drm] Connector 1:
[drm] HDMI-A-1
[drm] HPD5
[drm] DDC: 0x4874 0x4874 0x4875 0x4875 0x4876 0x4876 0x4877 0x4877
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY1
[drm] Connector 2:
[drm] DVI-D-1
[drm] HPD3
[drm] DDC: 0x4878 0x4878 0x4879 0x4879 0x487a 0x487a 0x487b 0x487b
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY
amdgpu 0000:07:00.0: fence driver on ring 0 use gpu addr 0x0000000100000008, cpu addr 0xffff9f9cfe655008
amdgpu 0000:07:00.0: fence driver on ring 1 use gpu addr 0x0000000100000018, cpu addr 0xffff9f9cfe655018
amdgpu 0000:07:00.0: fence driver on ring 2 use gpu addr 0x0000000100000028, cpu addr 0xffff9f9cfe655028
amdgpu 0000:07:00.0: fence driver on ring 3 use gpu addr 0x0000000100000038, cpu addr 0xffff9f9cfe655038
amdgpu 0000:07:00.0: fence driver on ring 4 use gpu addr 0x0000000100000048, cpu addr 0xffff9f9cfe655048
amdgpu 0000:07:00.0: fence driver on ring 5 use gpu addr 0x0000000100000058, cpu addr 0xffff9f9cfe655058
amdgpu 0000:07:00.0: fence driver on ring 6 use gpu addr 0x0000000100000068, cpu addr 0xffff9f9cfe655068
amdgpu 0000:07:00.0: fence driver on ring 7 use gpu addr 0x0000000100000078, cpu addr 0xffff9f9cfe655078
amdgpu 0000:07:00.0: fence driver on ring 8 use gpu addr 0x0000000100000088, cpu addr 0xffff9f9cfe655088
amdgpu 0000:07:00.0: fence driver on ring 9 use gpu addr 0x000000010000009c, cpu addr 0xffff9f9cfe65509c
amdgpu 0000:07:00.0: fence driver on ring 10 use gpu addr 0x00000001000000ac, cpu addr 0xffff9f9cfe6550ac
amdgpu 0000:07:00.0: fence driver on ring 11 use gpu addr 0x00000001000000bc, cpu addr 0xffff9f9cfe6550bc
[drm] Found UVD firmware Version: 1.79 Family ID: 16
amdgpu 0000:07:00.0: fence driver on ring 12 use gpu addr 0x0000000000a2d420, cpu addr 0xffffc3df88a5a420
[drm] Found VCE firmware Version: 52.4 Binary ID: 3
amdgpu 0000:07:00.0: fence driver on ring 13 use gpu addr 0x00000001000000dc, cpu addr 0xffff9f9cfe6550dc
amdgpu 0000:07:00.0: fence driver on ring 14 use gpu addr 0x00000001000000ec, cpu addr 0xffff9f9cfe6550ec
ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
amdgpu: [powerplay] [AVFS] Something is broken. See log!
amdgpu: [powerplay] Can't find requested voltage id in vdd_dep_on_sclk table!
amdgpu: [powerplay]
failed to send message 309 ret is 254
amdgpu: [powerplay]
failed to send pre message 14e ret is 254
[drm] ring test on 0 succeeded in 11 usecs
[drm] ring test on 9 succeeded in 7 usecs
[drm] ring test on 1 succeeded in 6 usecs
[drm] ring test on 2 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 2 usecs
[drm] ring test on 4 succeeded in 2 usecs
[drm] ring test on 5 succeeded in 4 usecs
[drm] ring test on 6 succeeded in 2 usecs
[drm] ring test on 7 succeeded in 2 usecs
[drm] ring test on 8 succeeded in 2 usecs
[drm] ring test on 10 succeeded in 5 usecs
[drm] ring test on 11 succeeded in 4 usecs
[drm] ring test on 12 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] ring test on 13 succeeded in 4 usecs
[drm] ring test on 14 succeeded in 2 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded
[drm] ib test on ring 1 succeeded
[drm] ib test on ring 2 succeeded
[drm] ib test on ring 3 succeeded
[drm] ib test on ring 4 succeeded
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] ib test on ring 8 succeeded
ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370 detected
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
usbcore: registered new interface driver rt2800usb
rt2800usb 1-5:1.0 wlp2s0f0u5: renamed from wlan0
[drm] ib test on ring 9 succeeded
[drm] ib test on ring 10 succeeded
[drm] ib test on ring 11 succeeded
[drm] ib test on ring 12 succeeded
[drm] ib test on ring 13 succeeded
[drm] fb mappable at 0xE0C37000
[drm] vram apper at 0xE0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: amdgpudrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
amdgpu 0000:07:00.0: fb0: amdgpudrmfb frame buffer device
[drm] Initialized amdgpu 3.18.0 20150101 for 0000:07:00.0 on minor 0
kauditd_printk_skb: 51 callbacks suppressed
audit: type=1130 audit(1520445380.833:62): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-udev-settle comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1520445380.835:63): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-lvmetad comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1520445380.910:64): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1520445380.910:65): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1520445380.923:66): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1520445380.972:67): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-nvme0n1p1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1130 audit(1520445381.698:68): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-pvscan@8:2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1130 audit(1520445384.605:71): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-mapper-lvmvg\x2dlvtemp comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1130 audit(1520445387.989:72): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-mapper-lvmvg\x2dlvvar comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[633]: Received request to flush runtime journal from PID 1
audit: type=1130 audit(1520445388.204:73): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1520445388.205:74): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd-journald[633]: File /var/log/journal/867877498fae48edaca127d77c151fd7/system.journal corrupted or uncleanly shut down, renaming and replacing.
audit: type=1130 audit(1520445388.650:75): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1520445393.211:76): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1520445394.053:77): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-mapper-lvmvg\x2dlvhome comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1130 audit(1520445394.214:78): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dracut-shutdown comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1520445394.227:79): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1520445394.227:80): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1520445394.279:81): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=nfs-config comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1520445394.279:82): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=nfs-config comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1520445394.310:83): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=fedora-import-state comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1520445394.667:84): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Netfilter messages via NETLINK v0.30.
ip_set: protocol 6
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
r8169 0000:04:00.0 enp4s0: link down
r8169 0000:04:00.0 enp4s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0f0u5: link is not ready
ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
r8169 0000:04:00.0 enp4s0: link up
IPv6: ADDRCONF(NETDEV_UP): wlp2s0f0u5: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0f0u5: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0f0u5: link is not ready
device enp4s0 entered promiscuous mode
device enp4s0 left promiscuous mode
tun: Universal TUN/TAP device driver, 1.6
virbr2: port 1(virbr2-nic) entered blocking state
virbr2: port 1(virbr2-nic) entered disabled state
device virbr2-nic entered promiscuous mode
virbr2: port 1(virbr2-nic) entered blocking state
virbr2: port 1(virbr2-nic) entered listening state
virbr2: port 1(virbr2-nic) entered disabled state
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered disabled state
device enp4s0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): wlp2s0f0u5: link is not ready
fuse init (API version 7.26)
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
rfkill: input handler disabled
wlp2s0f0u5: authenticate with d4:04:cd:b1:f0:50
wlp2s0f0u5: send auth to d4:04:cd:b1:f0:50 (try 1/3)
wlp2s0f0u5: authenticated
wlp2s0f0u5: associate with d4:04:cd:b1:f0:50 (try 1/3)
wlp2s0f0u5: RX AssocResp from d4:04:cd:b1:f0:50 (capab=0x1411 status=0 aid=1)
wlp2s0f0u5: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0f0u5: link becomes ready
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
FS-Cache: Loaded
Key type dns_resolver registered
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.spnego registered
Key type cifs.idmap registered
No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3), from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3 (or SMB2.1) specify vers=1.0 on mount.
CIFS VFS: cifs_mount failed w/return code = -22
No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3), from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3 (or SMB2.1) specify vers=1.0 on mount.
CIFS VFS: cifs_mount failed w/return code = -22
No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3), from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3 (or SMB2.1) specify vers=1.0 on mount.
CIFS VFS: cifs_mount failed w/return code = -22
SELinux: 32768 avtab hash slots, 109413 rules.
SELinux: 32768 avtab hash slots, 109413 rules.
SELinux: 8 users, 14 roles, 5110 types, 318 bools, 1 sens, 1024 cats
SELinux: 97 classes, 109413 rules
SELinux: Permission getrlimit in class process not defined in policy.
SELinux: Class sctp_socket not defined in policy.
SELinux: Class icmp_socket not defined in policy.
SELinux: Class ax25_socket not defined in policy.
SELinux: Class ipx_socket not defined in policy.
SELinux: Class netrom_socket not defined in policy.
SELinux: Class atmpvc_socket not defined in policy.
SELinux: Class x25_socket not defined in policy.
SELinux: Class rose_socket not defined in policy.
SELinux: Class decnet_socket not defined in policy.
SELinux: Class atmsvc_socket not defined in policy.
SELinux: Class rds_socket not defined in policy.
SELinux: Class irda_socket not defined in policy.
SELinux: Class pppox_socket not defined in policy.
SELinux: Class llc_socket not defined in policy.
SELinux: Class can_socket not defined in policy.
SELinux: Class tipc_socket not defined in policy.
SELinux: Class bluetooth_socket not defined in policy.
SELinux: Class iucv_socket not defined in policy.
SELinux: Class rxrpc_socket not defined in policy.
SELinux: Class isdn_socket not defined in policy.
SELinux: Class phonet_socket not defined in policy.
SELinux: Class ieee802154_socket not defined in policy.
SELinux: Class caif_socket not defined in policy.
SELinux: Class alg_socket not defined in policy.
SELinux: Class nfc_socket not defined in policy.
SELinux: Class vsock_socket not defined in policy.
SELinux: Class kcm_socket not defined in policy.
SELinux: Class qipcrtr_socket not defined in policy.
SELinux: Class smc_socket not defined in policy.
SELinux: the above unknown classes and permissions will be allowed
SELinux: policy capability network_peer_controls=1
SELinux: policy capability open_perms=1
SELinux: policy capability extended_socket_class=0
SELinux: policy capability always_check_network=0
SELinux: policy capability cgroup_seclabel=1
SELinux: unknown policy capability 5
wlp2s0f0u5: deauthenticating from d4:04:cd:b1:f0:50 by local choice (Reason: 3=DEAUTH_LEAVING)
IPv6: ADDRCONF(NETDEV_UP): wlp2s0f0u5: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0f0u5: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0f0u5: link is not ready
wlp2s0f0u5: authenticate with d4:04:cd:b1:f0:50
wlp2s0f0u5: send auth to d4:04:cd:b1:f0:50 (try 1/3)
wlp2s0f0u5: authenticated
wlp2s0f0u5: associate with d4:04:cd:b1:f0:50 (try 1/3)
wlp2s0f0u5: RX AssocResp from d4:04:cd:b1:f0:50 (capab=0x1411 status=0 aid=1)
wlp2s0f0u5: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0f0u5: link becomes ready
audit: type=1130 audit(1520453121.715:804): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=auditd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1520453121.715:805): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=auditd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1305 audit(1520453122.722:806): audit_enabled=1 old=1 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
IPv6: ADDRCONF(NETDEV_UP): wlp2s0f0u5: link is not ready
ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 14 failed to flush
IPv6: ADDRCONF(NETDEV_UP): wlp2s0f0u5: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0f0u5: link is not ready
wlp2s0f0u5: authenticate with d4:04:cd:b1:f0:50
wlp2s0f0u5: send auth to d4:04:cd:b1:f0:50 (try 1/3)
wlp2s0f0u5: authenticated
wlp2s0f0u5: associate with d4:04:cd:b1:f0:50 (try 1/3)
wlp2s0f0u5: RX AssocResp from d4:04:cd:b1:f0:50 (capab=0x1411 status=0 aid=1)
wlp2s0f0u5: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0f0u5: link becomes ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0f0u5: link is not ready
ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 14 failed to flush
IPv6: ADDRCONF(NETDEV_UP): wlp2s0f0u5: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0f0u5: link is not ready
wlp2s0f0u5: authenticate with 2c:b0:5d:82:92:4e
wlp2s0f0u5: send auth to 2c:b0:5d:82:92:4e (try 1/3)
wlp2s0f0u5: authenticated
wlp2s0f0u5: associate with 2c:b0:5d:82:92:4e (try 1/3)
wlp2s0f0u5: RX AssocResp from 2c:b0:5d:82:92:4e (capab=0x431 status=0 aid=8)
wlp2s0f0u5: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0f0u5: link becomes ready
virbr1: port 1(virbr1-nic) entered blocking state
virbr1: port 1(virbr1-nic) entered disabled state
device virbr1-nic entered promiscuous mode
virbr1: port 1(virbr1-nic) entered blocking state
virbr1: port 1(virbr1-nic) entered listening state
virbr1: port 1(virbr1-nic) entered disabled state
virbr1: port 2(vnet0) entered blocking state
virbr1: port 2(vnet0) entered disabled state
device vnet0 entered promiscuous mode
virbr1: port 2(vnet0) entered blocking state
virbr1: port 2(vnet0) entered listening state
virbr1: port 2(vnet0) entered learning state
virbr1: port 2(vnet0) entered forwarding state
virbr1: topology change detected, propagating